Grille Bar's Install

Thank you so much for your order!

We wanted to provide you with some helpful tips and tricks when installing your grille bars.

if you have any further questions after reading this please free to send us an email or give us a call!

1. Removal of Grille:

Remove all necessary hardware in order to remove your grille. YouTube may have a grille removal video for your specific make/ model.

2. Attaching Grille Bars:

Install the provided double sided tape to each bar. Insert your bar into your grill in a secure position, you may have to wedge the bars into your grill to have them fully secured and the 3m tape to touch the backside of the grill. For extra peace of mind, we recommend using a thin layer of some form of super glue along the sides of the bar to extra ensure a firm seal.

3. Wiring:

Connect all bars positive wires together using the provide solder shrink connectors, and 18 gauge wire. Heat the connectors up until you see the solder melt. Repeat this process with the ground wires. Most vehicles you can use the hood latch bolt for a ground, or you could simply use the battery. Several customers have tapped into their running lights, or fog lights for their power source, while others ran their power wire to the battery and used a switch to turn them on and off. If your truck is equipped with auxiliary switches your power wire can simply be hooked up to one of them. If you chose to implement the turn signal optional you would need to wire the yellow wire to your turn signal power wire, this is not mandatory if you just want the white option.

4. Insert Grille Back On:

Simply install all removed hardware that you have from taking off the grille